 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) Key Features ISL98001 March 8, 2006 FN6148.3 Data Sheet Triple Video Digitizer with Digital PLL The ISL98001 3-channel, 8-bit Analog Front End (AFE) contains all the functions necessary to digitize analog YPbPr video signals and RGB graphics signals from DVD players, digital VCRs, video set-top boxes, and personal computers. This product family's conversion rates support HDTV resolutions up to 1080p and PC monitor resolutions up to UXGA and QXGA, while the front end's programmable input bandwidth ensures sharp, clear images at all resolutions. To maximize performance with the widest variety of video sources, the ISL98001 features a fast-responding digital PLL (DPLL), providing extremely low jitter with PC graphics signals and quick recovery from VCR head switching with video signals. Integrated HSYNC and SOG processing eliminate the need for external slicers, sync separators, Schmitt triggers, and filters. Glitchless, automatic Macrovision(R)-compliance is obtained by a digital Macrovision(R) detection function that detects and automatically removes Macrovision(R) from the HSYNC signal. Ease-of-use is also emphasized with features such as the elimination of PLL charge pump current/VCO range programming and single-bit switching between RGB and YPbPr signals. Automatic Black Level Compensation (ABLCTM) eliminates part-to-part offset variation, ensuring perfect black level performance in every application. The ISL98001 is fully backwards compatible (hardware and software) with the X980xx family of AFEs. Features * 140MSPS, 170MSPS, 210MSPS, 240MSPS, and 275MSPS maximum conversion rates * Glitchless Macrovision(R)-compliant sync separator * Extremely fast recovery from VCR head switching * Low PLL clock jitter (250ps p-p @ 170MSPS) * 64 interpixel sampling positions * 0.35Vp-p to 1.4Vp-p video input range * Programmable bandwidth (100MHz to 780MHz) * 2 channel input multiplexer * RGB 4:4:4 and YUV 4:2:2 output formats * 5 embedded voltage regulators allow operation from single 3.3V supply and enhance performance, isolation * Completely independent 8-bit gain/10-bit offset control * Pb-free plus anneal available (RoHS compliant) Applications * Digital TVs * Projectors * Multifunction monitors * Digital KVM * RGB graphics processing Simplified Block Diagram Offset DAC ABLCTM Voltage Clamp RGB/YPbPrIN1 RGB/YPbPrIN2 3 3 PGA + 8 bit ADC 8 or 16 x3 RGB/YUVOUT HSYNCOUT VSYNCOUT SOGIN1/2 HSYNCIN1/2 VSYNCIN1/2 Sync Processing Digital PLL HSOUT PIXELCLKOUT AFE Configuration and Control 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved All other trademarks mentioned are the property of their respective owners. ISL98001 Ordering Information PART NUMBER (Note) ISL98001CQZ-140 ISL98001CQZ-170 ISL98001CQZ-210 ISL98001CQZ-240 ISL98001CQZ-275 MAXIMUM PIXEL RATE (MHz) 140 170 210 240 275 TEMPERATURE RANGE (C) 0 to 70 0 to 70 0 to 70 0 to 70 0 to 70 PACKAGE (Pb-free) 128 MQFP 128 MQFP 128 MQFP 128 MQFP 128 MQFP PKG. DWG. # MDP0055 MDP0055 MDP0055 MDP0055 MDP0055 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Block Diagram VCLAMP Offset DAC 10 ABLCTM RIN1 VIN+ VIN- 8 RIN2 PGA VCLAMP + 8 bit ADC 8 8 RP[7:0] RS[7:0] Offset DAC 10 ABLCTM Output Data Formatter GIN1 RGBGND1 GIN2 RGBGND2 VIN+ VIN- 8 8 PGA VCLAMP + 8 bit ADC 8 GP[7:0] GS[7:0] Offset DAC 10 ABLCTM BIN1 VIN+ VIN- 8 8 BIN2 PGA + 8 bit ADC 8 BP[7:0] BS[7:0] DATACLK SOGIN1 SOGIN2 HSYNCIN1 HSYNCIN2 VSYNCIN1 VSYNCIN2 HSYNCOUT CLOCKINV XTALIN XTALOUT SCL SDA SADDR VSYNCOUT DATACLK Sync Processing AFE Configuration and Control HSOUT VSOUT Digital PLL Serial Interface 2 XCLKOUT FN6148.3 March 8, 2006 ISL98001 Absolute Maximum Ratings Voltage on VA, VD, or VX (referenced to GNDA = GNDD = GNDX). . . . . . . . . . . . . . . . . 4.0V Voltage on any Analog Input Pin (referenced to GNDA). . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VA Voltage on any Digital Input Pin (referenced to GNDD). . . . . . . . . . . . . . . . . . . . . . . -0.3V to +6.0V Current into any Output Pin . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA ESD Classification Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000V Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V Thermal Information Thermal Resistance JA (C/W) MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Maximum Biased Junction Temperature . . . . . . . . . . . . . . . . . . 125C Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C Recommended Operating Conditions Temperature (Commercial) . . . . . . . . . . . . . . . . . . . . . 0C to +70C Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . VA = VD = VX = 3.3V CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Specifications Specifications apply for VA = VD = VX = 3.3V, pixel rate = 140MHz for ISL98001-140, 170MHz for ISL98001-170, 210MHz for ISL98001-210, 240MHz for ISL98001-240, 275MHz for ISL98001-275, fXTAL = 25MHz, TA = 25C, unless otherwise noted COMMENT MIN TYP MAX UNIT SYMBOL PARAMETER FULL CHANNEL CHARACTERISTICS Conversion Rate ISL98001-140 ISL98001-170 ISL98001-210 ISL98001-240 ISL98001-275 ADC Resolution Missing Codes DNL (FullChannel) Differential Non-Linearity ISL98001-140 ISL98001-170 ISL98001-210 ISL98001-240 ISL98001-275 INL (FullChannel) Integral Non-Linearity ISL98001-140 ISL98001-170 ISL98001-210 ISL98001-240 ISL98001-275 Gain Adjustment Range Gain Adjustment Resolution Gain Matching Between Channels Full Channel Offset Error, ABLCTM enabled Offset Adjustment Range (ABLCTM enabled or disabled) Percent of full scale ADC LSBs, over time and temperature ADC LSBs (See ABLCTM applications information section) 1.1 1.1 1.25 1.5 1.6 6 8 1 0.125 127 0.5 2.75 3.25 3.25 3.5 3.75 LSB LSB LSB LSB LSB dB Bits % LSB LSB 0.5 0.5 0.6 0.6 0.7 +1.0/-0.9 +1.0/-0.9 +1.0/-0.9 +1.1/-0.9 +1.2/-0.9 LSB LSB LSB LSB LSB Guaranteed monotonic To achieve rated 240/275MHz speeds, see the Initialization section on page 26. Per Channel 10 10 10 10 10 8 None 140 170 210 240 275 MHz MHz MHz MHz MHz Bits 3 FN6148.3 March 8, 2006 ISL98001 Electrical Specifications Specifications apply for VA = VD = VX = 3.3V, pixel rate = 140MHz for ISL98001-140, 170MHz for ISL98001-170, 210MHz for ISL98001-210, 240MHz for ISL98001-240, 275MHz for ISL98001-275, fXTAL = 25MHz, TA = 25C, unless otherwise noted (Continued) COMMENT MIN TYP MAX UNIT SYMBOL PARAMETER ANALOG VIDEO INPUT CHARACTERISTICS (RIN1, GIN1, BIN1, RIN2, GIN2, BIN2) Input Range Input Bias Current Input Capacitance Full Power Bandwidth INPUT CHARACTERISTICS (SOGIN1, SOGIN2) VIH/VIL Input Threshold Voltage Hysteresis Input Capacitance INPUT CHARACTERISTICS (HSYNCIN1, HSYNCIN2) VIH/VIL Input Threshold Voltage Hysteresis RIN CIN Input Impedance Input Capacitance Programmable - see register listing for details Centered around threshold voltage 0.4 to 3.2 240 1.2 5 V mV k pF Programmable - see register listing for details Centered around threshold 0 to -0.3 40 5 V mV pF Programmable DC restore clamp off 0.35 0.7 0.01 5 780 1.4 1 VP-P A pF MHz DIGITAL INPUT CHARACTERISTICS (SDA, SADDR, CLOCKINVIN, RESET) VIH VIL I Input HIGH Voltage Input LOW Voltage Input Leakage Current Input Capacitance SCHMITT DIGITAL INPUT CHARACTERISTICS (SCL, VSYNCIN1, VSYNCIN2) VT+ VTI Low to High Threshold Voltage High to Low Threshold Voltage Input Leakage Current Input Capacitance DIGITAL OUTPUT CHARACTERISTICS (DATACLK, DATACLK) VOH VOL Output HIGH Voltage, IO = 16mA Output LOW Voltage, IO = -16mA 2.4 0.4 V V 10 5 1.45 0.95 V V nA pF RESET has a 70k pullup to VD 10 5 2.0 0.8 V V nA pF DIGITAL OUTPUT CHARACTERISTICS (RP, GP, BP, RS, GS, BS, HSOUT, VSOUT, HSYNCOUT, VSYNCOUT) VOH VOL RTRI Output HIGH Voltage, IO = 8mA Output LOW Voltage, IO = -8mA Pulldown to GNDD when Three-state RP, GP, BP, RS, GS, BS only 56 2.4 0.4 V V k DIGITAL OUTPUT CHARACTERISTICS (SDA, XCLKOUT) VOH VOL Output HIGH Voltage, IO = 4mA Output LOW Voltage, IO = -4mA XCLKOUT only; SDA is open-drain 2.4 0.4 V V POWER SUPPLY REQUIREMENTS VA VD VX Analog Supply Voltage Digital Supply Voltage Crystal Oscillator Supply Voltage 3 3 3 3.3 3.3 3.3 3.6 3.6 3.6 V V V 4 FN6148.3 March 8, 2006 ISL98001 Electrical Specifications Specifications apply for VA = VD = VX = 3.3V, pixel rate = 140MHz for ISL98001-140, 170MHz for ISL98001-170, 210MHz for ISL98001-210, 240MHz for ISL98001-240, 275MHz for ISL98001-275, fXTAL = 25MHz, TA = 25C, unless otherwise noted (Continued) COMMENT MIN TYP MAX 200 With grayscale ramp input 1.4 With grayscale ramp input With grayscale ramp input With grayscale ramp input With grayscale ramp input With grayscale ramp input ADCs, PLL powered down 0.95 1.05 1.10 1.15 1.20 50 200 2 1.10 1.15 1.20 1.25 1.30 80 UNIT mA mA mA W W W W W mW SYMBOL IA ID IX PD PARAMETER Analog Supply Current Digital Supply Current Crystal Oscillator Supply Current Total Power Dissipation ISL98001-140 ISL98001-170 ISL98001-210 ISL98001-240 ISL98001-275 Standby Mode AC TIMING CHARACTERISTICS PLL Jitter Sampling Phase Steps Sampling Phase Tempco Sampling Phase Differential Nonlinearity HSYNC Frequency Range fXTAL fXTALIN tSETUP tHOLD Crystal Frequency Range Frequency Range with External 3.3V Clock Signal Driving XTALIN DATA Valid Before Rising Edge of DATACLK 15pF DATACLK load, 15pF DATA load (Note 1) Degrees out of 360 10 23 23 1.3 2.0 25 25 5.6 per step 64 1 3 150 27 33.5 ps/C kHz MHz MHz ns ns 250 450 ps p-p DATA Valid After Rising Edge of DATACLK 15pF DATACLK load, 15pF DATA load (Note 1) AC TIMING CHARACTERISTICS (2-WIRE INTERFACE) fSCL SCL Clock Frequency Maximum Width of a Glitch on SCL that Will 2 XTAL periods min be Suppressed tAA tBUF tLOW tHIGH tSU:STA tHD:STA tSU:DAT tHD:DAT tSU:STO tDH NOTE: 1. Setup and hold times are specified for a 170MHz DATACLK rate. SCL LOW to SDA Data Out Valid Time the Bus Must be Free Before a New Transmission Can Start Clock LOW Time Clock HIGH Time Start Condition Setup Time Start Condition Hold Time Data In Setup Time Data In Hold Time Stop Condition Setup Time Data Output Hold Time 4 XTAL periods min 5 XTAL periods plus SDA's RC time constant 1.3 1.3 0.6 0.6 0.6 100 0 0.6 160 0 80 See comment 400 kHz ns s s s s s s ns ns s ns 5 FN6148.3 March 8, 2006 ISL98001 tF SCL tSU:STA SDA IN tHD:STA tSU:DAT tHIGH tLOW tR tHD:DAT tSU:STO tAA SDA OUT tDH tBUF FIGURE 1. 2-WIRE INTERFACE TIMING DATACLK DATACLK tSETUP Pixel Data tHOLD FIGURE 2. DATA OUTPUT SETUP AND HOLD TIMING HSYNCIN The HSYNC edge (programmable leading or trailing) that the DPLL is locked to. The sampling phase setting determines its relative position to the rest of the AFE's output signals tHSYNCin-to-HSout = 7.5ns + (PHASE/64 +8.5)*tPIXEL Analog Video In P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 DATACLK 8 DATACLK Pipeline Latency RP/GP/BP[7:0] D0 D1 D2 D3 RS/GS/BS[7:0] HSOUT Programmable Width and Polarity FIGURE 3. 24-BIT OUTPUT MODE 6 FN6148.3 March 8, 2006 ISL98001 HSYNCIN The HSYNC edge (programmable leading or trailing) that the DPLL is locked to. The sampling phase setting determines its relative position to the rest of the AFE's output signals tHSYNCin-to-HSout = 7.5ns + (PHASE/64 +8.5)*tPIXEL Analog Video In P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 DATACLK 8.5 DATACLK Pipeline Latency GP[7:0] G0 (Yo) G1 (Y1) G2 (Y2) RP[7:0] B0 (Uo) R1 (V1) B2 (U2) BP[7:0] HSOUT Programmable Width and Polarity FIGURE 4. 24-BIT 4:2:2 OUTPUT MODE (FOR YUV SIGNALS) HSYNCIN The HSYNC edge (programmable leading or trailing) that the DPLL is locked to. The sampling phase setting determines its relative position to the rest of the AFE's output signals tHSYNCin-to-HSout = 7.5ns + (PHASE/64 +10.5)*tPIXEL Analog Video In P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 DATACLK RP/GP/BP[7:0] D0 D2 RS/GS/BS[7:0] D1 D3 HSOUT Programmable Width and Polarity FIGURE 5. 48-BIT OUTPUT MODE 7 FN6148.3 March 8, 2006 ISL98001 The HSYNC edge (programmable leading or trailing) that the DPLL is locked to. The sampling phase setting determines its relative position to the rest of the AFE's output signals tHSYNCin-to-HSout = 7.5ns + (PHASE/64 +8.5)*tPIXEL Analog Video In P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 HSYNCIN DATACLK RP/GP/BP[7:0] D0 D2 RS/GS/BS[7:0] D1 HSOUT Programmable Width and Polarity FIGURE 6. 48-BIT OUTPUT MODE, INTERLEAVED TIMING 8 FN6148.3 March 8, 2006 ISL98001 Pin Configuration (MQFP, ISL98001CQZ-xxx) HSYNCOUT VSYNCOUT DATACLK DATACLK HSOUT VSOUT GNDD GNDD GNDD GNDD RP0 RP1 RP2 RP3 RP4 RP5 RP6 VCORE RP7 RS0 RS1 RS2 105 RS3 104 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 103 RS4 VD VD NC NC GNDA VBYPASS GNDA VA RIN1 GNDA VBYPASS GNDA VA GIN1 RGBGND1 SOGIN1 GNDA VBYPASS GNDA VA BIN1 VA GNDA RIN2 GNDA GIN2 RGBGND2 SOGIN2 GNDA BIN2 VA GNDA VCOREADC GNDD HSYNCIN1 HSYNCIN2 VA GNDA GNDX VX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 RS5 RS6 RS7 VD GNDD GP0 GP1 GP2 GP3 GP4 GP5 GP6 GP7 VD GNDD GS0 GS1 GS2 GS3 GS4 GS5 GS6 GS7 VCORE GNDD VD GNDD BP0 BP1 BP2 BP3 BP4 BP5 BP6 BP7 VD GNDD VREGIN 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 NC XTALIN CLOCKINVIN GNDD GNDD GNDD XTALOUT XCLKOUT VD VSYNCIN1 VSYNCIN2 9 VREGOUT SADDR RESET SDA BS7 BS6 BS5 BS4 BS3 BS2 BS1 SCL VCORE VPLL BS0 64 FN6148.3 March 8, 2006 ISL98001 Pin Descriptions SYMBOL RIN1 GIN1 BIN1 RGBGND1 MQFP PIN #(s) 7 12 19 13 DESCRIPTION Analog input. Red channel 1. DC couple or AC couple through 0.047F. Analog input. Green channel 1. DC couple or AC couple through 0.047F. Analog input. Blue channel 1. DC couple or AC couple through 0.047F. Analog input. Ground reference for the R, G, and B inputs of channel 1 in the DC coupled configuration. Connect to the same ground as channel 1's R, G, and B termination resistors. This signal is not used in the AC-coupled configuration, but the pin should still be tied to GNDA. Analog input. Sync on Green. Connect to GIN1 through a 0.01F capacitor in series with a 500 resistor. Digital input, 5V tolerant, 240mV hysteresis, 1.2k impedance to GNDA. Connect to channel 1's HSYNC signal through a 680 series resistor. Digital input, 5V tolerant, 500mV hysteresis. Connect to channel 1's VSYNC signal. Analog input. Red channel 2. DC couple or AC couple through 0.047F. Analog input. Green channel 2. DC couple or AC couple through 0.047F. Analog input. Blue channel 2. DC couple or AC couple through 0.047F. Analog input. Ground reference for the R, G, and B inputs of channel 2 in the DC coupled configuration. Connect to the same ground as channel 1's R, G, and B termination resistors. This signal is not used in the AC-coupled configuration, but the pin should still be tied to GNDA. Analog input. Sync on Green. Connect to GIN1 through a 0.01F capacitor in series with a 500 resistor. Digital input, 5V tolerant, 240mV hysteresis, 1.2k impedance to GNDA. Connect to channel 2's HSYNC signal through a 680 series resistor. Digital input, 5V tolerant, 500mV hysteresis. Connect to channel 2's VSYNC signal. Digital input, 5V tolerant. When high, changes the pixel sampling phase by 180 degrees. Toggle at frame rate during VSYNC to allow 2x undersampling to sample odd and even pixels on sequential frames. Tie to DGND if unused. Digital input, 5V tolerant, active low, 70k pullup to VD. Take low for at least 1s and then high again to reset the ISL98001. This pin is not necessary for normal use and may be tied directly to the VD supply. Analog input. Connect to external 24.5MHz to 27MHz crystal and load capacitor (See crystal spec for recommended loading). Typical oscillation amplitude is 1.0VP-P centered around 0.5V. Analog output. Connect to external 24.5MHz to 27MHz crystal and load capacitor (See crystal spec for recommended loading). Typical oscillation amplitude is 1.0VP-P centered around 0.5V. 3.3V digital output. Buffered crystal clock output at fXTAL or fXTAL/2. May be used as system clock for other system components. Digital input, 5V tolerant. Address = 0x4C when tied low. Address = 0x4D when tied high. Digital input, 5V tolerant, 500mV hysteresis. Serial data clock for 2-wire interface. Bidirectional Digital I/O, open drain, 5V tolerant. Serial data I/O for 2-wire interface. 3.3V digital output. Red channel, primary pixel data. 56K pulldown when three-stated. 3.3V digital output. Red channel, secondary pixel data. 56K pulldown when three-stated. 3.3V digital output. Green channel, primary pixel data. 56K pulldown when three-stated. 3.3V digital output. Green channel, secondary pixel data. 56K pulldown when three-stated. 3.3V digital output. Blue channel, primary pixel data. 56K pulldown when three-stated. 3.3V digital output. Blue channel, secondary pixel data. 56K pulldown when three-stated. 3.3V digital output. Data clock output. Equal to pixel clock rate in 24-bit mode, one half of pixel clock rate in 48-bit mode. 3.3V digital output. Inverse of DATACLK. 3.3V digital output. HSYNC output aligned with pixel data. Use this output to frame the digital output data. This output is always purely horizontal sync (without any composite sync signals). SOGIN1 HSYNCIN1 VSYNCIN1 RIN2 GIN2 BIN2 RGBGND2 14 33 44 22 24 28 25 SOGIN2 HSYNCIN2 VSYNCIN2 CLOCKINVIN 26 34 45 41 RESET XTALIN XTALOUT XCLKOUT SADDR SCL SDA RP[7:0] RS[7:0] GP[7:0] GS[7:0] BP[7:0] BS[7:0] DATACLK DATACLK HSOUT 46 39 40 47 48 50 49 112-119 100-107 90-97 80-87 68-75 55-62 121 122 125 10 FN6148.3 March 8, 2006 ISL98001 Pin Descriptions (Continued) SYMBOL VSOUT HSYNCOUT MQFP PIN #(s) 126 127 DESCRIPTION 3.3V digital output. Artificial VSYNC output aligned with pixel data. VSOUT is generated 8 pixel clocks after the trailing edge of HSOUT. This signal is usually not needed. 3.3V digital output. Buffered HSYNC (or SOG or CSYNC) output. This is typically used for measuring HSYNC period. This output will pass composite sync signals and Macrovision signals if present on HSYNCIN or SOGIN. 3.3V digital output. Buffered VSYNC output. For composite sync signals, this output will be asserted for the duration of the disruption of the normal HSYNC pattern. This is typically used for measuring VSYNC period. VSYNCOUT VA GNDA 128 6, 11, 18, 20, 29, Power supply for the analog section. Connect to a 3.3V supply and bypass each pin to GNDA with 0.1F. 35 3, 5, 8, 10, 15, 17, 21, 23, 27, 30, 36 54, 67, 77, 89, 99, 111, 124 32, 43, 51, 53, 66, 76, 78, 88, 98, 108, 110, 120, 123 38 37 4, 9, 16 65 64 Ground return for VA and VBYPASS. VD GNDD Power supply for all digital I/Os. Connect to a 3.3V supply and bypass each pin to GNDD with 0.1F. Ground return for VD, VCORE, VCOREADC, and VPLL. VX GNDX VBYPASS VREGIN VREGOUT Power supply for crystal oscillator. Connect to a 3.3V supply and bypass to GNDX with 0.1F. Ground return for VX. Bypass these pins to GNDA with 0.1F. Do not connect these pins to each other or anything else. 3.3V input voltage for VCORE voltage regulator. Connect to a 3.3V source and bypass to GNDD with 0.1F. Regulated output voltage for VPLL, VCOREADC and VCORE; typically 1.9V. Connect only to VPLL, VCOREADC and VCORE and bypass at input pins as instructed below. Do not connect to anything else - this output can only supply power to VPLL, VCOREADC and VCORE. Internal power for the ADC's digital logic. Connect to VREGOUT through a 10 resistor and bypass to GNDD with 0.1F. Internal power for the PLL's digital logic. Connect to VREGOUT through a 10 resistor and bypass to GNDD with 0.1F. Internal power for core logic. Connect to VREGOUT and bypass each pin to GNDD with 0.1F. Reserved. Do not connect anything to these pins. VCOREADC VPLL VCORE NC 31 42 52, 79, 109 1, 2, 63 11 FN6148.3 March 8, 2006 ISL98001 Register Listing ADDRESS 0x00 REGISTER (DEFAULT VALUE) Device ID (read only) SYNC Status (read only) BIT(S) 3:0 7:4 0 1 2 3 4 5 6 7 0x02 SYNC Polarity (read only) 0 1 2 3 4 5 7:6 0x03 HSYNC Slicer (0x33) 2:0 FUNCTION NAME Device Revision Device ID HSYNC1 Active HSYNC2 Active VSYNC1 Active VSYNC2 Active SOG1 Active SOG2 Active PLL Locked CSYNC Detect at Sync Splitter HSYNC1 Polarity HSYNC2 Polarity VSYNC1 Polarity VSYNC2 Polarity HSYNC1 Trilevel HSYNC2 Trilevel N/A HSYNC1 Threshold DESCRIPTION 1 = initial silicon, 2 = second revision, etc. 1 = ISL98001 0: HSYNC1 is Inactive 1: HSYNC1 is Active 0: HSYNC2 is Inactive 1: HSYNC2 is Active 0: VSYNC1 is Inactive 1: VSYNC1 is Active 0: VSYNC2 is Inactive 1: VSYNC2 is Active 0: SOG1 is Inactive 1: SOG1 is Active 0: SOG2 is Inactive 1: SOG2 is Active 0: PLL is unlocked 1: PLL is locked to incoming HSYNC 0: Composite Sync signal not detected 1: Composite Sync signal is detected 0: HSYNC1 is Active High 1: HSYNC1 is Active Low 0: HSYNC2 is Active High 1: HSYNC2 is Active Low 0: VSYNC1 is Active High 1: VSYNC1 is Active Low 0: VSYNC2 is Active High 1: VSYNC2 is Active Low 0: HSYNC1 is Standard Sync 1: HSYNC1 is Trilevel Sync 0: HSYNC2 is Standard Sync 1: HSYNC2 is Trilevel Sync Returns 0 000 = lowest (0.4V) All values referred to 011 = default (1.6V) voltage at HSYNC input 111 = highest (3.2V) pin, 240mV hysteresis Set to 00 See HSYNC1 0: HSYNC/VSYNC Glitch Filter Enabled (default) 1: HSYNC/VSYNC Glitch Filter Disabled 0x0 = lowest (0mV) 0x6 = default (120mV) 20mV step size 0xF = highest (300mV) 0: SOG low pass filter disabled 1: SOG low pass filter enabled, 14MHz corner (default) 0: 40mV SOG hysteresis enabled 1: 40mV SOG hysteresis disabled (default) Set to 00. 0x01 3 6:4 7 0x04 SOG Slicer (0x16) Note: Due to normal device-to-device variation in slicer levels, SOG Slicer settings of 0 (0mV), 1 (20mV), and 2 (40mV) may not be functional. The minimum recommended SOG Slicer setting is 3 (60mV). 3:0 Reserved HSYNC2 Threshold Disable Glitch Filter SOG1 and SOG2 Threshold SOG Filter Enable SOG Hysteresis Disable Reserved 4 5 7:6 12 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x05 REGISTER (DEFAULT VALUE) Input configuration (0x00) BIT(S) 0 1 FUNCTION NAME Channel Select Input Coupling 0: VGA1 1: VGA2 0: AC coupled (positive input connected to clamp DAC during clamp time, negative input disconnected from outside pad and always internally tied to appropriate clamp DAC). 1: DC coupled (+ and - inputs are brought to pads and never connected to clamp DACs). Analog clamp signal is turned off in this mode. 2 RGB/YPbPr 0: RGB inputs Base ABLC target code = 0x00 for R, G, and B) 1: YPbPr inputs Base ABLC target code = 0x00 for G (Y) Base ABLC target code = 0x80 for R (Pr) and B (Pb) 3 4 Sync Type Composite Sync Source 0: Separate HSYNC/VSYNC 1: Composite (from SOG or CSYNC on HSYNC) 0: SOGIN 1: HSYNCIN Note: If Sync Type = 0, the multiplexer will pass HSYNCIN regardless of the state of this bit. 0: DC restore clamping and ABLCTM suspended during COAST. 1: DC restore clamping and ABLCTM continue during COAST. 0: Interval between HSYNC pulses masked (preventing PLL from seeing Macrovision and any spurious glitches). 1: Interval between HSYNC pulses not masked (Macrovision will cause PLL to lose lock). 0: HSYNCOUT signal is masked (any Macrovision, sync glitches on incoming SYNC are stripped from HSYNCOUT). 1: HSYNCOUT signal is not masked (any Macrovision, sync glitches on incoming SYNC appear on HSYNCOUT). If Sync Mask Disable = 1, HSYNCOUT is not masked. Channel gain, where: gain (V/V) = 0.5 + [7:0]/170 0x00: gain = 0.5V/V (1.4VP-P input = full range of ADC) 0x55: gain = 1.0V/V (0.7VP-P input = full range of ADC) 0xFF: gain = 2.0V/V (0.35VP-P input = full range of ADC) DESCRIPTION 5 COAST CLAMP enable 6 Sync Mask Disable 7 HSYNCOUT Mask Disable 0x06 Red Gain (0x55) 7:0 Red Gain 0x07 Green Gain (0x55) 7:0 Green Gain 0x08 Blue Gain (0x55) 7:0 Blue Gain 13 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x09 Red Offset (0x80) 0x0A Green Offset (0x80) 0x0B Blue Offset (0x80) 0x0C Offset DAC Configuration (0x00) 0 1 3:2 5:4 7:6 0x0D AFE Bandwidth (0x2E) 0 3:1 Offset DAC Range Reserved Red Offset DAC LSBs Green Offset DAC LSBs Blue Offset DAC LSBs Unused AFE BW Value doesn't matter 3dB point for AFE lowpass filter 000b: 100MHz 111b: 780MHz (default) 0x0: Peaking off 0x1: Moderate peaking 0x2: Maximum recommended peaking (default) Values above 2 are not recommended. 14-bit HTOTAL (number of active pixels) value The minimum HTOTAL value supported is 0x200. HTOTAL to PLL is updated on LSB write only. 7:0 Blue Offset 7:0 Green Offset REGISTER (DEFAULT VALUE) BIT(S) 7:0 FUNCTION NAME Red Offset DESCRIPTION ABLCTM enabled: digital offset control. A 1LSB change in this register will shift the ADC output by 1 LSB. ABLCTM disabled: analog offset control. These bits go to the upper 8-bits of the 10-bit offset DAC. A 1LSB change in this register will shift the ADC output approximately 1 LSB (Offset DAC range = 0) or 0.5LSBs (Offset DAC range = 1). 0x00 = min DAC value or -0x80 digital offset, 0x80 = mid DAC value or 0x00 digital offset, 0xFF = max DAC value or +0x7F digital offset 0: 1/2 ADC fullscale (1 DAC LSB ~ 1 ADC LSB) 1: 1/4 ADC fullscale (1 DAC LSB ~ 1/2 ADC LSB) Set to 0. These bits are the LSBs necessary for 10-bit manual offset DAC control. Combine with their respective MSBs in registers 0x09, 0x0A, and 0x0B to achieve 10-bit offset DAC control. 7:4 Peaking 0x0E 0x0F 0x10 PLL Htotal MSB (0x03) PLL Htotal LSB (0x20) PLL Sampling Phase (0x00) 5:0 7:0 5:0 PLL Htotal MSB PLL Htotal LSB PLL Sampling Phase Used to control the phase of the ADC's sample point relative to the period of a pixel. Adjust to obtain optimum image quality. One step = 5.625 (1.56% of pixel period). Pre-coast Post-coast Number of lines the PLL will coast prior to the start of VSYNC. Number of lines the PLL will coast after the end of VSYNC. 0x11 0x12 PLL Pre-coast (0x04) PLL Post-coast (0x04) 7:0 7:0 14 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x13 REGISTER (DEFAULT VALUE) PLL Misc (0x04) BIT(S) 0 1 2 3 5:4 FUNCTION NAME PLL Lock Edge HSYNC1 PLL Lock Edge HSYNC2 Reserved CLKINVIN Pin Disable CLKINVIN Pin Function DESCRIPTION 0: Lock on trailing edge of HSYNC1 (default) 1: Lock on leading edge of HSYNC1 0: Lock on trailing edge of HSYNC2 (default) 1: Lock on leading edge of HSYNC2 Set to 0 0: CLKINVIN pin enabled (default) 1: CLKINVIN pin disabled (internally forced low) 00: CLKINV (default) 01: External CLAMP (See Note) 10: External COAST 11: External PIXCLK Note: the CLAMP pulse is used to - perform a DC restore (if enabled) - start the ABLCTM function (if enabled), and - update the data to the Offset DACs (always). In the default internal CLAMP mode, the ISL98001 automatically generates the CLAMP pulse. If External CLAMP is selected, the Offset DAC values only change on the leading edge of CLAMP. If there is no internal clamp signal, there will be up to a 100ms delay between when the PGA gain or offset DAC register is written to, and when the PGA or offset DAC is actually updated. 6 7 0x14 DC Restore and ABLCTM starting pixel MSB (0x00) DC Restore and ABLCTM starting pixel LSB (0x03) DC Restore Clamp Width (0x10) 4:0 XCLKOUT Frequency 0: XCLKOUT = fCRYSTAL (default) 1: XCLKOUT = fCRYSTAL/2 Disable XCLKOUT DC Restore and ABLCTM starting pixel (MSB) DC Restore and ABLCTM starting pixel (LSB) DC Restore clamp width (pixels) 0 = XCLKOUT enabled 1 = XCLKOUT is logic low Pixel after HSYNCIN trailing edge to begin DC restore and ABLCTM functions. 13-bits. Set this register to the first stable black pixel following the trailing edge of HSYNCIN. 0x15 7:0 0x16 7:0 Width of DC restore clamp used in AC-coupled configurations. Has no effect on ABLCTM. Minimum value is 0x02 (a setting of 0x01 or 0x00 will not generate a clamp pulse). 0: ABLCTM enabled (default) 1: ABLCTM disabled Set to 0. Number of black pixels averaged every line for ABLCTM function 00: 16 pixels [default] 01: 32 pixels 10: 64 pixels 11: 128 pixels ABLCTM Time constant (lines) = 2(5+[6:4]) 000 = 32 lines 100 = 512 lines (default) 111 = 4096 lines Set to 0. 0x17 ABLCTM Configuration (0x40) 0 1 3:2 ABLCTM disable Reserved ABLCTM pixel width 6:4 ABLCTM bandwidth 7 Reserved 15 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x18 REGISTER (DEFAULT VALUE) Output Format (0x00) BIT(S) 0 FUNCTION NAME Bus Width DESCRIPTION 0: 24-bits: Data output on RP, GP, BP only; RS, GS, BS are all driven low (default). 1: 48-bits: Data output on RP, RP, GP, GS, BS, BS. 0: No interleaving: data changes on same edge of DATACLK (default). 1: Interleaved: Secondary databus data changes on opposite edge of DATACLK from primary databus. 0: First data byte after trailing edge of HSOUT appears on RP, GP, BP (default). 1: First data byte after trailing edge of HSOUT appears on RS, GS, BS (primary and secondary busses are reversed). 0: U0 V0 U2 V2 U4 V4 U6 V6... (default) 1: U0 V1 U2 V3 U4 V5 U6 V7... (X980xx) 0: Data is formatted as 4:4:4 (RGB, default). 1: Data is decimated to 4:2:2 (YUV), blue channel is driven low. 0: HSOUT, VSOUT, and Pixel Data changes on falling edge of DATACLK (default). 1: HSOUT, VSOUT, and Pixel Data changes on rising edge of DATACLK. 0: Active High (default) 1: Active Low 0: Active High (default) 1: Active Low HSOUT width, in pixels. Minimum value is 0x01 for 24bit modes, 0x02 for 48-bit modes. 0 = Output byte enabled 1 = Output byte three-stated These bits override all other I/O settings Output data pins have 56k pulldown resistors to GNDD. 1 Interleaving (48-bit mode only) 2 Bus Swap (48-bit mode only) 3 4 UV order (422 mode only) 422 mode 5 DATACLK Polarity 6 7 0x19 0x1A HSOUT Width (0x10) Output Signal Disable (0x00) 7:0 0 1 2 3 4 5 6 7 0x1B Power Control (0x00) 0 1 2 3 7:4 0x1C PLL Tuning (0x49) 7:0 VSOUT Polarity HSOUT Polarity HSOUT Width Three-state RP[7:0] Three-state RS7:0] Three-state GP[7:0] Three-state GS7:0] Three-state BP[7:0] Three-state BS[7:0] Three-state DATACLK Three-state DATACLK Red Power-down Green Power-down Blue Power-down PLL Power-down Reserved Reserved 0 = DATACLK enabled 1 = DATACLK three-stated 0 = DATACLK enabled 1 = DATACLK three-stated 0 = Red ADC operational (default) 1 = Red ADC powered down 0 = Green ADC operational (default) 1 = Green ADC powered down 0 = Blue ADC operational (default) 1 = Blue ADC powered down 0 = PLL operational (default) 1 = PLL powered down Set to 0. Use default setting of 0x49 for all PC and video modes except signals coming from an analog VCR. Set to 0x4C for analog videotape compatibility. 16 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x1D REGISTER (DEFAULT VALUE) Red ABLC Target (0x00) BIT(S) 7:0 FUNCTION NAME Red ABLC Target DESCRIPTION This is a 2's complement number controlling the target code of the Red ADC output when ABLC is enabled. In RGB mode, the Red ADC output will be servoed to 0x00 + the number in this register (-0x00 to +0x7F). In YPbPr mode, the Red ADC output will be servoed to 0x80 + the number in this register (-0x80 to +0x7F). Note: This register does NOT disable the digital offset adder. Both functions can be used simultaneously. This is a 2's complement number controlling the target code of the Green ADC output when ABLC is enabled. In RGB and YPbPr modes, the Green ADC output will be servoed to 0x00 + the number in this register (-0x00 to +0x7F). Note: This register does NOT disable the digital offset adder. Both functions can be used simultaneously. This is a 2's complement number controlling the target code of the Blue ADC output when ABLC is enabled. In RGB mode, the Blue ADC output will be servoed to 0x00 + the number in this register (-0x00 to +0x7F). In YPbPr mode, the Blue ADC output will be servoed to 0x80 + the number in this register (-0x80 to +0x7F). Note: This register does NOT disable the digital offset adder. Both functions can be used simultaneously. Set to 1000 DC Restore clamp's ON resistance. Shared for all three channels 0: Infinite (clamp disconnected) (default) 1: 1600 2: 800 3: 533 4: 400 5: 320 6: 267 7: 228 Set to 0. 0x1E Green ABLC Target (0x00) 7:0 Green ABLC Target 0x1F Blue ABLC Target (0x00) 7:0 Blue ABLC Target 0x23 DC Restore Clamp (0x18) 3:0 6:4 Reserved DC Restore Clamp Impedance 7 Reserved 17 FN6148.3 March 8, 2006 ISL98001 Register Listing (Continued) ADDRESS 0x25 REGISTER (DEFAULT VALUE) Sync Separator Control (0x00) BIT(S) 0 FUNCTION NAME Three-state Sync Outputs DESCRIPTION 0: VSYNCOUT, HSYNCOUT, VSOUT, HSOUT are active (default). 1: VSYNCOUT, HSYNCOUT, VSOUT, HSOUT are in three-state. 0: Coast active high (default) 1: Coast active low Set to 0 for internal VSYNC extracted from CSYNC. Set to 0 or 1 as appropriate to match external VSYNC or external COAST. 0: HSOUT's trailing edge is locked to selected HSYNCIN's lock edge. Leading edge moves backward in time as HSOUT width is increased (X980xx default). 1: HSOUT's leading edge is locked to selected HSYNCIN's lock edge. Trailing edge moves forward in time as HSOUT width is increased. Set to 0 0: VSYNCOUT is aligned to HSYNCOUT edge, providing "perfect" VSYNC signal (default). 1: VSYNCOUT is "raw" integrator output. Set to 0 Set to 0 0: VSOUT is output on VSOUT pin (default). 1: COAST (including pre- and post-coast COAST) is output on VSOUT pin. When using the ISL98001-240 or the ISL98001-275, the value in this register may need to be changed to achieve the maximum conversion rate (see the Initialization section on page 26). This register may also be adjusted to lower power consumption at slower pixel rates (see the Reducing Power Dissipation section for more information). 1 COAST Polarity 2 HSOUT Lock Edge 3 4 Reserved VSYNCOUT Mode 5 6 7 Reserved Reserved VSOUT Mode 0x2B Crystal Multiplier (0x14) 7:0 Crystal Multiplier Technical Highlights The ISL98001 provides all the features of traditional triple channel video AFEs, but adds several next-generation enhancements, bringing performance and ease of use to new levels. DACs) spend most of that time slewing to the new pixel value. The pixel may settle to its final value with 1ns or less before it begins slewing to the next pixel. In many cases it rings and never settles at all. So precision, low-jitter sampling is a fundamental requirement at these speeds, and a difficult one for an analog PLL to meet. The ISL98001's DPLL has less than 250ps of jitter, peak to peak, and independent of the pixel rate. The DPLL generates 64 phase steps per pixel (vs. the industry standard 32), for fine, accurate positioning of the sampling point. The crystallocked NCO inside the DPLL completely eliminates drift due to charge pump leakage, so there is inherently no frequency or phase change across a line. An intelligent all-digital loop filter/ controller eliminates the need for the user to have to program or change anything (except for the number of pixels) to lock over a range from interlaced video (10MHz or higher) to UXGA 60Hz (170MHz, with the ISL98001-170). The DPLL eliminates much of the performance limitations and complexity associated with noise-free digitization of high speed signals. DPLL All video AFEs must phase lock to an HSYNC signal, supplied either directly or embedded in the video stream (Sync On Green). Historically this has been implemented as a traditional analog PLL. At SXGA and lower resolutions, an analog PLL solution has proven adequate, if somewhat troublesome (due to the need to adjust charge pump currents, VCO ranges and other parameters to find the optimum trade-off for a wide range of pixel rates). As display resolutions and refresh rates have increased, however, the pixel period has shrunk. An XGA pixel at a 60Hz refresh rate has 15.4ns to change and settle to its new value. But at UXGA 75Hz, the pixel period is 4.9ns. Most consumer graphics cards (even the ones with "350MHz" 18 FN6148.3 March 8, 2006 ISL98001 Automatic Black Level Compensation (ABLCTM) and Gain Control Traditional video AFEs have an offset DAC prior to the ADC, to both correct for offsets on the incoming video signals and add/subtract an offset for user "brightness control" without sacrificing the 8-bit dynamic range of the ADC. This solution is adequate, but it places significant requirements on the system's firmware, which must execute a loop that detects the black portion of the signal and then servos the offset DACs until that offset is nulled (or produces the desired ADC output code). Once this has been accomplished, the offset (both the offset in the AFE and the offset of the video card generating the signal) is subject to drift - the temperature inside a monitor or projector can easily change 50C between power-on/offset calibration on a cold morning and the temperature reached once the monitor and the monitor's environment have reached steady state. Offset can drift significantly over 50C, reducing image quality and requiring that the user do a manual calibration once the monitor has warmed up. In addition to drift, many AFEs exhibit interaction between the offset and gain controls. When the gain is changed, the magnitude of the offset is changed as well. This again increases the complexity of the firmware as it tries to optimize gain and offset settings for a given video input signal. Instead of adjusting just the offset, then the gain, both have to be adjusted interactively until the desired ADC output is reached. The ISL98001 simplifies offset and gain adjustment and completely eliminates offset drift using its Automatic Black Level Compensation (ABLCTM) function. ABLCTM monitors the black level and continuously adjusts the ISL98001's 10-bit offset DACs to null out the offset. Any offset, whether due to the video source or the ISL98001's analog amplifiers, is eliminated with 10-bit (1/4 of an ADC LSB) accuracy. Any drift is compensated for well before it can have a visible effect. Manual offset adjustment control is still available - an 8-bit register allows the firmware to adjust the offset 64 codes in exactly 1 ADC LSB increments. And gain is now completely independent of offset - adjusting the gain no longer affects the offset, so there is no longer a need to program the firmware to cope with interactive offset and gain controls. Finally, there should be no concerns over ABLCTM itself introducing visible artifacts; it doesn't. ABLCTM functions at a very low frequency, changing the offset in 1/4 LSB increments, so it can't cause visible brightness fluctuations. And once ABLCTM is locked, if the offset doesn't drift, the DACs won't change. If desired, ABLCTM can be disabled, allowing the firmware to work in the traditional way, with 10-bit offset DACs under the firmware's control. Changing the gain does not affect the DC offset, and the weight of an Offset DAC LSB does not vary depending on the gain setting. The full-scale gain is set in the three 8-bit registers (0x06-0x08). The ISL98001 can accept input signals with amplitudes ranging from 0.35VP-P to 1.4VP-P. The offset controls shift the entire RGB input range, changing the input image brightness. Three separate registers provide independent control of the R, G, and B channels. Their nominal setting is 0x80, which forces the ADC to output code 0x00 (or 0x80 for the R (Pr) and B (Pb) channels in YPbPr mode) during the back porch period when ABLCTM is enabled. Functional Description Inputs The ISL98001 digitizes analog video inputs in both RGB and Component (YPbPr) formats, with or without embedded sync (SOG). RGB Inputs For RGB inputs, the black/blank levels are identical and equal to 0V. The range for each color is typically 0V to 0.7V from black to white. HSYNC and VSYNC are separate signals. Component YPbPr Inputs In addition to RGB and RGB with SOG, the ISL98001 has an option that is compatible with the component YPbPr video inputs typically generated by DVD players. While the ISL98001 digitizes signals in these color spaces, it does not perform color space conversion; if it digitizes an RGB signal, it outputs digital RGB, while if it digitizes a YPbPr signal, it outputs digital YCbCr, also called YUV. The Luminance (Y) signal is applied to the Green Channel and is processed in a manner identical to the Green input with SOG described previously. The color difference signals Pb and Pr are bipolar and swing both above and below the black level. When the YPbPr mode is enabled, the black level output for the color difference channels shifts to a mid scale value of 0x80. Setting configuration register 0x05[2] = 1 enables the YPbPr signal processing mode of operation. TABLE 1. YUV MAPPING (4:4:4) INPUT SIGNAL Y Pb Pr ISL98001 INPUT CHANNEL Green Blue Red ISL98001 OUTPUT ASSIGNMENT Green Blue Red OUTPUT SIGNAL Y0Y1Y2Y3 U0U1U2U3 V0V1V2V3 Gain and Offset Control To simplify image optimization algorithms, the ISL98001 features fully-independent gain and offset adjustment. 19 FN6148.3 March 8, 2006 ISL98001 Automatic Black Level Compensation (ABLCTM) Loop Fixed Offset 10 10 10 DC Restoration CLAMP GENERATION DC Restore Clamp DAC VCLAMP To ABLC Block Offset DAC Offset Control Registers 0x00 8 ABLCTM ABLCTM Fixed Offset 8 8 ABLCTM R(GB)IN1 R(GB)GND1 VGA1 VIN+ VIN- PGA Input Bandwidth 8 bit ADC 8 8 To Output Formatter R(GB)IN2 R(GB)GND2 VGA2 Bandwidth Control FIGURE 7. VIDEO FLOW (INCLUDING ABLCTM) The ISL98001 can optionally decimate the incoming data to provide a 4:2:2 output stream (configuration register 0x18[4] = 1) as shown in Table 2. TABLE 2. YUV MAPPING (4:2:2) INPUT SIGNAL Y Pb Pr ISL98001 INPUT CHANNEL Green Blue Red ISL98001 OUTPUT ASSIGNMENT Green Blue Red OUTPUT SIGNAL Y0Y1Y2Y3 driven low U0V0U2V2 HSYNC. If register 0x05[5] = 0 (the default), the clamp will not be applied while the DPLL is coasting, preventing any clamp voltage errors from composite sync edges, equalization pulses, or Macrovision signals. After the trailing edge of HSYNC, the DC restore clamp is turned on after the number of pixels specified in the DC Restore and ABLCTM Starting Pixel registers (0x14 and 0x15) has been reached. The clamp is applied for the number of pixels specified by the DC Restore Clamp Width Register (0x16). The clamp can be applied to the back porch of the video, or to the front porch (by increasing the DC Restore and ABLCTM Starting Pixel registers so all the active video pixels are skipped). If DC-coupled operation is desired, the input to the ADC will be the difference between the input signal (RIN1, for example) and that channel's ground reference (RGBGND1 in that example). There is also a "compatibility mode", enabled by setting bit 3 of register 0x18 to a 1, that outputs the U and V data with the format used by the previous generation ("X980xx") series of AFEs, shown in Table 3. TABLE 3. YUV MAPPING (4:2:2) INPUT SIGNAL Y Pb Pr ISL98001 INPUT CHANNEL Green Blue Red ISL98001 OUTPUT ASSIGNMENT Green Blue Red OUTPUT SIGNAL Y0Y1Y2Y3 driven low U0V1U2V3 SOG For component YPbPr signals, the sync signal is embedded on the Y channel's video, which is connected to the green input, hence the name SOG (Sync on Green). The horizontal sync information is encoded onto the video input by adding the sync tip during the blanking interval. The sync tip level is typically 0.3V below the video black level. To minimize the loading on the green channel, the SOG input for each of the green channels should be AC-coupled to the ISL98001 through a series combination of a 10nF capacitor and a 500 resistor. Inside the ISL98001, a window comparator compares the SOG signal with an internal 4-bit programmable threshold level reference ranging from 0mV to 300mV below the minimum sync level. The SOG threshold level, hysteresis, and low-pass filter is programmed via register 0x04. If the Sync-On-Green function is not needed, the SOGIN pin(s) may be left unconnected. Input Coupling Inputs can be either AC-coupled (default) or DC-coupled (See register 0x05[1]). AC coupling is usually preferred since it allows video signals with substantial DC offsets to be accurately digitized. The ISL98001 provides a complete internal DC-restore function, including the DC restore clamp (See Figure 7) and programmable clamp timing (registers 0x14, 0x15, 0x16, and 0x23). When AC-coupled, the DC restore clamp is applied every line, a programmable number of pixels after the trailing edge of 20 FN6148.3 March 8, 2006 ISL98001 SYNC Processing The ISL98001 can process sync signals from 3 different sources: discrete HSYNC and VSYNC, composite sync on the HSYNC input, or composite sync from a Sync-On-Green (SOG) signal embedded on the Green video input. The ISL98001 has SYNC activity detect functions to help the firmware determine which sync source is available. HSYNCOUT, set the HSYNCOUT Mask Disable bit (register 0x05 bit 7). Headswitching from Analog Videotape Signals Occasionally this AFE may be used to digitize signals coming from analog videotape sources. The most common example of this is a Digital VCR (which for best signal quality would be connected to this AFE with a component YPbPr connection). If the digital VCR is playing an older analog VHS tape, the sync signals from the VCR may contain the worst of the traditional analog tape artifacts: headswitching. Headswitching is traditionally the enemy of PLLs with large capture ranges, because a headswitch can cause the HSYNC period to change by as much as 90%. To the PLL, this can look like a frequency change of -50% to greater than +900%, causing errors in the output frequency (and obviously the phase) to change. Subsequent HSYNCs have the correct, original period, but most analog PLLs will take dozens of lines to settle back to the correct frequency and phase after a headswitch disturbance. This causes the top of the image to "tear" during normal playback. In "trick modes" (fast forward and rewind), the HSYNC signal has multiple headswitch-like discontinuities, and many PLLs never settle to the correct value before the next headswitch, rendering the image completely unintelligible. Macrovision The ISL98001 automatically detects the presence of Macrovision-encoded video. When Macrovision is detected, it generates a mask signal that is ANDed with the incoming SOG CSYNC signal to remove the Macrovision before the HSYNC goes to the PLL. No additional programming is required to support Macrovision. If desired (it is never necessary in normal operation), this function can be disabled by setting the Sync Mask Disable (register 0x05 bit 6) to a 1. The mask signal is also applied to the HSYNCOUT signal. When Sync Mask Disable = 0, any Macrovision present on the incoming sync will not be visible on HSYNCOUT. If the application requires the Macrovision pulses to be visible on ACTIVITY 0x01[6:0] & POLARITY 0x02[5:0] DETECT HSYNC1 SLICER 0x03[2:0] 0: VGA1 SOG SLICER 0x1C HSYNC2 SLICER 0x03[6:4] HSYNCIN HSYNCIN1 CSYNC SOURCE 00, 10, 11: HSYNCIN 0x05[4:3] 01: SOGIN 1: VGA2 VSYNCIN SYNC SPLITTER VSYNC SYNC TYPE 1: SYNC SPLTR 0x05[3] 0: VSYNCIN HSYNCOUT VSYNCIN1 SOGIN1 0x05[0] SOGIN HSYNCIN2 VSYNCOUT VSYNCIN2 SOGIN2 SOG SLICER 0x1C COAST GENERATION 0x11, 0x12, 0x13[2] RP[7:0] Pixel Data from AFE 24 RS[7:0] GP[7:0] Output Formatter 0x18, 0x19, 0x1A GS[7:0] BP[7:0] BS[7:0] DATACLK DATACLK HSOUT VSOUT XTALCLOCKOUT CLOCKINVIN PLL XTALIN 0: /1 0x13 [6] /2 1: /2 0x0E through 0x13 PIXCLK XTALOUT HS FIGURE 8. SYNC FLOW 21 FN6148.3 March 8, 2006 ISL98001 Intersil's DPLL has the capability to correct large phase changes almost instantly by maximizing the phase error gain while keeping the frequency gain relatively low. This is done by changing the contents of register 0x1C to 0x4C. This increases the phase error gain to 100%. Because a phase setting this high will slightly increase jitter, the default setting (0x49) for register 0x1C is recommended for all other sync sources. Table 4 shows the corner frequencies for different register settings. Register 0x0D[7:4] controls a programmable zero, allowing high frequencies to be boosted, restoring some of the harmonics lost due to excessive EMI filtering, cable losses, etc. This control has a very large range, and can introduce high frequency noise into the image, so it should be used judiciously, or as an advanced user adjustment. TABLE 5. PEAKING CORNER FREQUENCIES 0X0D[7:4] VALUE 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xA 0xB 0xC 0xD 0xE 0xF ZERO CORNER FREQUENCY Peaking disabled 800MHz 400MHz 265MHz 200MHz 160MHz 135MHz 115MHz 100MHz 90MHz 80MHz 70MHz 65MHz 60MHz 55MHz 50MHz PGA The ISL98001's Programmable Gain Amplifier (PGA) has a nominal gain range from 0.5V/V (-6dB) to 2.0V/V (+6dB). The transfer function is: V GainCode Gain --- = 0.5 + --------------------------- V 170 where GainCode is the value in the Gain register for that particular color. Note that for a gain of 1V/V, the GainCode should be 85 (0x55). This is a different center value than the 128 (0x80) value used by some other AFEs, so the firmware should take this into account when adjusting gains. The PGAs are updated by the internal clamp signal once per line. In normal operation this means that there is a maximum delay of one HSYNC period between a write to a Gain register for a particular color and the corresponding change in that channel's actual PGA gain. If there is no regular HSYNC/SOG source, or if the external clamp option is enabled (register 0x13[5:4]) but there is no external clamp signal being generated, it may take up to 100ms for a write to the Gain register to update the PGA. This is not an issue in normal operation with RGB and YPbPr signals. Bandwidth and Peaking Control Register 0x0D[3:1] controls a low pass filter allowing the input bandwidth to be adjusted with three bit resolution between its default value (0x0E = 780MHz) and its minimum bandwidth (0x00, for 100MHz). Typically the higher the resolution, the higher the desired input bandwidth. To minimize noise, video signals should be digitized with the minimum bandwidth setting that passes sharp edges. TABLE 4. BANDWIDTH CONTROL 0x0D[3:0] VALUE (LSB = "x" = "don't care") 000x 001x 010x 011x 100x 101x 110x 111x AFE BANDWIDTH 100MHz 130MHz 150MHz 180MHz 230MHz 320MHz 480MHz 780MHz Table 5 shows the corner frequency of the zero for different peaking register settings. Values above 0x2 may cause excessive noise, depending on the quality of the input signal and the PCB environment. Offset DAC The ISL98001 features a 10-bit Digital-to-Analog Converter (DAC) to provide extremely fine control over the full channel offset. The DAC is placed after the PGA to eliminate interaction between the PGA (controlling "contrast") and the Offset DAC (controlling "brightness"). In normal operation, the Offset DAC is controlled by the ABLCTM circuit, ensuring that the offset is always reduced to sub-LSB levels (See the following ABLCTM section for more information). When ABLCTM is enabled, the Offset registers (0x09, 0x0A, 0x0B) control a digital offset added to or subtracted from the output of the ADC. This mode provides the best image quality and eliminates the need for any offset calibration. If desired, ABLCTM can be disabled (0x17[0] = 1) and the Offset DAC programmed manually, with the 8 most 22 FN6148.3 March 8, 2006 ISL98001 TABLE 6. OFFSET DAC RANGE AND OFFSET DAC ADJUSTMENT OFFSET DAC RANGE 0X0C[0] 0 1 0 1 10-BIT OFFSET DAC RESOLUTION 0.25 ADC LSBs (0.68mV) 0.125 ADC LSBs (0.34mV) 0.25 ADC LSBs (0.68mV) 0.125 ADC LSBs (0.34mV) ABLCTM 0x17[0] 0 (ABLC on) 0 (ABLC on) 1 (ABLC off) 1 (ABLC off) USER OFFSET CONTROL RESOLUTION USING REGISTERS 0x09 - 0X0B ONLY (8-BIT OFFSET CONTROL) 1 ADC LSB (digital offset control) 1 ADC LSB (digital offset control) 1.0 ADC LSB (analog offset control) 0.5 ADC LSB (analog offset control) USER OFFSET CONTROL RESOLUTION USING REGISTERS 0X09 - 0x0B AND 0X0C[7:2](10-BIT OFFSET CONTROL) N/A N/A 0.25 ADC LSB (analog offset control) 0.125 ADC LSB (analog offset control) significant bits in registers 0x09, 0x0A, 0x0B, and the 2 least significant bits in register 0x0C[7:2]. The default Offset DAC range is 127 ADC LSBs. Setting 0x0C[0] = 1 reduces the swing of the Offset DAC by 50%, making 1 Offset DAC LSB the weight of 1/8th of an ADC LSB. This provides the finest offset control and applies to both ABLCTM and manual modes. XTAL provide a reference frequency to the PLL. The PLL then generates the pixel clock frequency that equal to the incoming HSYNC frequency times the HTOTAL value programmed into registers 0x0E and 0x0F. The stability of the clock is very important and correlates directly with the quality of the image. During each pixel time transition, there is a small window where the signal is slewing from the old pixel amplitude and settling to the new pixel value. At higher frequencies, the pixel time transitions at a faster rate, which makes the stable pixel time even smaller. Any jitter in the pixel clock reduces the effective stable pixel time and thus the sample window in which pixel sampling can be made accurately. Automatic Black Level Compensation (ABLCTM) ABLC is a function that continuously removes all offset errors from the incoming video signal by monitoring the offset at the output of the ADC and servoing the 10-bit analog DAC to force those errors to zero. When ABLC is enabled, the user offset control is a digital adder, with 8-bit resolution (See Table 6). When the ABLC function is enabled (0x17[0] = 0), the ABLC function is executed every line after the trailing edge of HSYNC. If register 0x05[5] = 0 (the default), the ABLC function will be not be triggered while the DPLL is coasting, preventing any composite sync edges, equalization pulses, or Macrovision signals from corrupting the black data and potentially adding a small error in the ABLC accumulator. After the trailing edge of HSYNC, the start of ABLC is delayed by the number of pixels specified in registers 0x14 and 0x15. After that delay, the number of pixels specified by register 0x17[3:2] are averaged together and added to the ABLC's accumulator. The accumulator stores the average black levels for the number of lines specified by register 0x17[6:4], which is then used to generate a 10-bit DAC value. The default values provide excellent results with offset stability and absolute accuracy better than 1 ADC LSB for most input signals. Sampling Phase The ISL98001 provides 64 low-jitter phase choices per pixel period, allowing the firmware to precisely select the optimum sampling point. The sampling phase register is 0x10. HSYNC Slicer To further minimize jitter, the HSYNC inputs are treated as analog signals, and brought into a precision slicer block with thresholds programmable in 400mV steps with 240mV of hysteresis, and a subsequent digital glitch filter that ignores any HSYNC transitions within 100ns of the initial transition. This processing greatly increases the AFE's rejection of ringing and reflections on the HSYNC line and allows the AFE to perform well even with pathological HSYNC signals. Voltages given above and in the HSYNC Slicer register description are with respect to a 3.3V sync signal at the HSYNCIN input pin. To achieve 5V compatibility, a 680 series resistor should be placed between the HSYNC source and the HSYNCIN input pin. Relative to a 5V input, the hysteresis will be 240mV*5V/3.3V = 360mV, and the slicer step size will be 400mV*5V/3.3V = 600mV per step. ADC The ISL98001 features 3 fully differential, high-speed 8-bit ADCs. SOG Slicer The SOG input has programmable threshold, 40mV of hysteresis, and an optional low pass filter that can be used to remove high frequency video spikes (generated by overzealous video peaking in a DVD player, for example) that can cause Clock Generation A Digital Phase Lock Loop (DPLL) is employed to generate the pixel clock frequency. The HSYNC input and the external 23 FN6148.3 March 8, 2006 ISL98001 TABLE 7. SYNC SOURCE DETECTION TABLE HSYNC DETECT 1 1 0 VSYNC DETECT 1 0 0 SOG DETECT X X 1 TRILEVEL DETECT X X 0 Sync is on HSYNC and VSYNC Sync is composite sync on HSYNC. Set Input configuration register to CSYNC on HSYNC and confirm that CSYNC detect bit is set. Sync is composite sync on SOG. It is possible that trilevel sync is present but amplitude is too low to set trilevel detect bit. Use video mode table to determine if this video mode is likely to have trilevel sync, and set clamp start, width values appropriately if it is. Sync is composite sync on SOG. Sync is likely to be trilevel. No valid sync sources on any input. RESULT 0 0 0 0 1 0 1 X false SOG triggers. The SOG threshold sets the comparator threshold relative to the sync tip (the bottom of the SOG pulse). SYNC Status and Polarity Detection The SYNC Status register (0x01) and the SYNC Polarity register (0x02) continuously monitor all 6 sync inputs (VSYNCIN, HSYNCIN, and SOGIN for each of 2 channels) and report their status. However, accurate sync activity detection is always a challenge. Noise and repetitive video patterns on the Green channel may look like SOG activity when there actually is no SOG signal, while non-standard SOG signals and trilevel sync signals may have amplitudes below the default SOG slicer levels and not be easily detected. As a consequence, not all of the activity detect bits in the ISL98001 are correct under all conditions. Table 7 shows how to use the SYNC Status register (0x01) to identify the presence of and type of a sync source. The firmware should go through the table in the order shown, stopping at the first entry that matches the activity indicators in the SYNC Status register. Final validation of composite sync sources (SOG or Composite sync on HSYNC) should be done by setting the Input Configuration register (0x05) to the composite sync source determined by this table, and confirming that the CSYNC detect bit is set. The accuracy of the Trilevel Sync detect bit can be increased by multiple reads of the Trilevel Sync detect bit. See the Trilevel Sync Detect section for more details. For best SOG operation, the SOG low pass filter (register 0x04[4] should always be enabled to reject the high frequency peaking often seen on video signals. channel, the SOG slicer will clamp the video to a DC level and will reject any sporadic noise. There should be no false positive SOG detects if there is no video on Green (or Y). If there is video on Green (or Y) with no valid SOG signal, the SOG activity detect bit may sometimes report false positives (it will detect SOG when no SOG is actually present). This is due to the presence of video with a repetitive pattern that creates a waveform similar to SOG. For example, the desktop of a PC operating system is black during the front porch, horizontal sync, and back porch, then increases to a larger value for the video portion of the screen. This creates a repetitive video waveform very similar to SOG that may falsely trigger the SOG Activity detect bit. However, in these cases where there is active video without SOG, the SYNC information will be provided either as separate H and V sync on HSYNCIN and VSYNCIN, or composite sync on HSYNCIN. HSYNCIN and VSYNCIN should therefore be used to qualify SOG. The SOG Active bit should only be considered valid if HSYNC Activity Detect = 0. Note: Some pattern generators can output HSYNC and SOG simultaneously, in which case both the HSYNC and the SOG activity bits will be set, and valid. Even in this case, however, the monitor should still choose HSYNC over SOG. TriLevel Sync Detect Unlike SOG detect, the TriLevel Sync detect function does not check for 64 consecutive trilevel pulses in a row, and is therefore less robust than the SOG detect function. It will report false positives for SOG-less video for the same reasons the SOG activity detect does, and should therefore be qualified with both HSYNC and SOG. TriLevel Sync Detect should only be considered valid if HSYNC Activity Detect = 0 and SOG Activity Detect = 1. If there is a SOG signal, the TriLevel Detect bit will operate correctly for standard trilevel sync levels (600mVP-P). In some real-world situations, the peak-to-peak sync amplitude may be significantly smaller, sometimes 300mVP-P or less. In these cases the sync slicer will continue to operate correctly, but the TriLevel Detect bit may not be set. Trilevel detection accuracy can be enhanced by polling the trilevel bit multiple times. If HSYNC is inactive, SOG is present, and FN6148.3 March 8, 2006 HSYNC and VSYNC Activity Detect Activity on these bits always indicates valid sync pulses, so they should have the highest priority and be used even if the SOG activity bit is also set. SOG Activity Detect The SOG activity detect bit monitors the output of the SOG slicer, looking for 64 consecutive pulses with the same period and duty cycle. If there is no signal on the Green (or Y) 24 ISL98001 the TriLevel Sync Detect bit is read as a 1, there is a high likelihood there is trilevel sync. information. VSYNCOUT (including the sync separator function) remains active in power-down mode. VSYNCOUT is generally used for mode detection, start of field detection, and even/odd field detection. CSYNC Present If a composite sync source (either CSYNC on HSYNC or SOG) is selected through bits 3 and 4 of register 0x05, the CSYNC Present bit in register 0x01 should be set. CSYNC Present detects the presence of a low frequency, repetitive signal inside HSYNC, which indicates a VSYNC signal. The CSYNC Present bit should be used to confirm that the signal being received is a reliable composite sync source. HSOUT HSOUT is generated by the ISL98001's control logic and is synchronized to the output DATACLK and the digital pixel data on the output databus. Its trailing edge is aligned with pixel 0. Its width, in units of pixels, is determined by register 0x19, and its polarity is determined by register 0x18[7]. As the width is increased, the trailing edge stays aligned with pixel 0, while the leading edge is moved backwards in time relative to pixel 0. HSOUT is used by the scaler to signal the start of a new line of pixels. The HSOUT Width register (0x19) controls the width of the HSOUT pulse. The pulse width is nominally 1 pixel clock period times the value in this register. In the 48 bit output mode (register 0x18[0] = 1), or the YPbPr input mode (register 0x05[2] = 1), the HSOUT width is incremented in 2 pixel clock (1 DATACLK) increments (See Table 8). TABLE 8. HSOUT WIDTH HSOUT WIDTH (PIXEL CLOCKS) REGISTER 0x19 VALUE 0 1 2 3 4 5 6 7 24-BIT MODE, RGB 0 1 2 3 4 5 6 7 24-BIT MODE, YPbPr 1 1 3 3 5 5 7 7 ALL 48-BIT MODES 0 0 2 2 4 4 6 6 SYNC Output Signals The ISL98001 has 2 pairs of HSYNC and VSYNC output signals, HSYNCOUT and VSYNCOUT, and HSOUT and VSOUT. HSYNCOUT and VSYNCOUT are buffered versions of the incoming sync signals; no synchronization is done. These signals are used for mode detection HSOUT and VSOUT are generated by the ISL98001's logic and are synchronized to the output DATACLK and the digital pixel data on the output databus. HSOUT is used to signal the start of a new line of digital data. VSOUT is not needed in most applications. Both HSYNCOUT and VSYNCOUT (including the sync separator function) remain active in power-down mode. This allows them to be used in conjunction with the Sync Status registers to detect valid video without powering up the ISL98001. HSYNCOUT HSYNCOUT is an unmodified, buffered version of the incoming HSYNCIN or SOGIN signal of the selected channel, with the incoming signal's period, polarity, and width to aid in mode detection. HSYNCOUT will be the same format as the incoming sync signal: either horizontal or composite sync. If a SOG input is selected, HSYNCOUT will output the entire SOG signal, including the VSYNC portion, pre-/post-equalization pulses if present, and Macrovision pulses if present. HSYNCOUT remains active when the ISL98001 is in power-down mode. HSYNCOUT is generally used for mode detection. VSOUT VSOUT is generated by the ISL98001's control logic and is synchronized to the output DATACLK and the digital pixel data on the output databus. Its leading and trailing edges are aligned with pixel 7 (8 pixels after HSYNC trailing edge). Its width, in units of lines, is equal to the width of the incoming VSYNC (See the VSYNCOUT description). Its polarity is determined by register 0x18[6]. This output is not needed in most applications. Intersil strongly discourages using this signal - use VSYNCOUT instead. VSYNCOUT VSYNCOUT is an unmodified, buffered version of the incoming VSYNCIN signal of the selected channel, with the original VSYNC period, polarity, and width to aid in mode detection. If a SOG input is selected, this signal will output the VSYNC signal extracted by the ISL98001's sync slicer. Extracted VSYNC will be the width of the embedded VSYNC pulse plus pre- and post-equalization pulses (if present). Macrovision pulses from an NTSC DVD source will lengthen the width of the VSYNC pulse. Macrovision pulses from other sources (PAL DVD or videotape) may appear as a second VSYNC pulse encompassing the width of the Macrovision. See the Macrovision section for more Crystal Oscillator An external 22MHz to 27MHz crystal supplies the low-jitter reference clock to the DPLL. The absolute frequency of this crystal within this range is unimportant, as is the crystal's temperature coefficient, allowing use of less expensive, lower-grade crystals. 25 FN6148.3 March 8, 2006 ISL98001 As an alternative to a crystal, the XTALIN pin can be driven with a 3.3V CMOS-level external clock source at any frequency between 22MHz and 33.5MHz. The ISL98001's jitter specification assumes a low-jitter crystal source. If the external clock source has increased jitter, the sample clock generated by the DPLL may exhibit increased jitter as well. TABLE 9. CRYSTAL MULTIPLIER FOR 275MHz PIXEL RATE Crystal Frequency Range (MHz) 23 - 23.9 23.9 - 25 25.0 - 26.2 26.2 - 27 Reset The ISL98001 has a Power On Reset (POR) function that resets the chip to its default state when power is initially applied, including resetting all the registers to their default settings as described in the Register Listing. The external RESET pin duplicates the reset function of the POR without having to cycle the power supplies. The RESET pin does not need to be used in normal operation and can be tied high. Register 0x2B Value decimal hex 24 0x18 23 0x17 22 0x16 21 0x15 Reducing Power Dissipation It is possible to reduce the total power consumption of the ISL98001 in applications where power is a concern. There are several techniques that can be used to reduce power consumption: * Internal Digital Voltage Regulator. The ISL98001 features a 3.3V to 1.9V voltage regulator (pins VREGIN and VREGOUT) for the low voltage digital supply. This regulator typically sources 100mA at 1.9V, dissipating up to 140mW in heat. Providing an external, clean 1.8V supply to the VCORE, VPLL, and VCOREADC will substantially reduce power dissipation. The external 1.8V supply should ramp up after (or at the same time as) the digital 3.3V (VD) supply. * Internal Analog Voltage Regulator. The ISL98001 also features a 3.3V to 1.9V voltage regulator for the low voltage analog supply. This voltage appears on the VBYPASS pins. Unlike the digital low voltage supply, there are no "in" and "out" connections for this regulator. However, this internal regulator can only source voltage, and can be effectively bypassed by driving the VBYPASS pins with an external, clean 2.0V supply. The external 2.0V supply should ramp up after (or at the same time as) the analog 3.3V (VA) supply. * Buffering Digital Outputs. Switching 24 or 48 data output pins into a capacitive bus can consume significant current. The higher the capacitance on the external databus, the higher the switching current. To minimize current consumption inside the ISL98001, minimize bus capacitance and/or insert data buffers such as the SN64AVC16827 between the ISL98001's data outputs and the external databus. * Internal Reference Frequency. The crystal frequency is multiplied by the value in register 0x2B to generate an internal high frequency reference clock. For pixel rates up to 160MHz, this internal frequency should be set to 400MHz 10% for minimum power consumption. For example, for a 33MHz frequency at XTALIN, register 0x2B should be set to a value of 0x0C to minimize power. For pixel rates greater than 160MHz, the register 0x2B value should be set using Equation 1 in the Initialization section on page 26. Initialization The ISL98001 initializes with default register settings for an AC-coupled, 640x480 RGB input on the VGA1 channel, with a 24-bit output. An input signal meeting these conditions will be output on the databus without writing to any of the configuration registers. The configuration registers will need to be changed as required to support other resolutions, different input channels, different sync sources, phase optimization etc. The ISL98001-275 and (under some conditions) the ISL98001-240 require one additional register write to operate at their maximum speed. The ISL98001 generates an internal reference clock equal to the crystal frequency times the value in register 0x2B (nominally 0x14 or 20 decimal). The typical value of this clock is therefore 500MHz (25MHz * 20). The minimum value of this clock is 360MHz. This internal clock needs to be greater than 2 times the PLL pixel rate. The nominal value of 500MHz therefore supports pixel rates up to 250MHz. To achieve pixel rates of 275MHz, or to work with lower frequency crystals, the multiplier in register 0x2B must be programmed using Equation 1: f MAX_PIXELCLK 0x2B value = INT 2 ---------------------------------------- + 1 f CRYSTAL (EQ. 1) For example, if the maximum pixel clock is 263MHz (QXGA), and the crystal frequency is 24MHz, then register 0x2B should be set to 1 + INT(2*263/24) = 1 + INT(21.917) = 1 + 21 = 22 = 0x16. Table 9 illustrates the compensation values required to operate the ISL98001-275 at its maximum speed of 275MHz. If lower maximum Pixel Clock frequencies are needed, using the formula above to reduce the value of register 0x2B will reduce power consumption. Standby Mode The ISL98001 can be placed into a low power standby mode by writing a 0x0F to register 0x1B, powering down the triple ADCs, the DPLL, and most of the internal clocks. 26 FN6148.3 March 8, 2006 ISL98001 To allow input monitoring and mode detection during powerdown, the following blocks remain active: * Serial interface (including the crystal oscillator) to enable register read/write activity * Activity and polarity detect functions (registers 0x01 and 0x02) * The HSYNCOUT and VSYNCOUT pins (for mode detection) 0x1B, for example, one would write 0x00 in step 2, then repeat step three 28 times, with each read returning the next register value. The ISL98001 has a 7-bit address on the serial bus. The upper 6-bits are permanently set to 100110, with the lower bit determined by the state of pin 48. This allows two ISL98001s to be independently controlled while sharing the same bus. The bus is nominally inactive, with SDA and SCL high. Communication begins when the host issues a START command by taking SDA low while SCL is high (Figure 9). The ISL98001 continuously monitors the SDA and SCL lines for the start condition and will not respond to any command until this condition has been met. The host then transmits the 7-bit serial address plus a R/W bit, indicating if the next transaction will be a Read (R/W = 1) or a Write (R/W = 0). If the address transmitted matches that of any device on the bus, that device must respond with an ACKNOWLEDGE (Figure 10). Once the serial address has been transmitted and acknowledged, one or more bytes of information can be written to or read from the slave. Communication with the selected device in the selected direction (read or write) is ended by a STOP command, where SDA rises while SCL is high (Figure 9), or a second START command, which is commonly used to reverse data direction without relinquishing the bus. Data on the serial bus must be valid for the entire time SCL is high (Figure 11). To achieve this, data being written to the ISL98001 is latched on a delayed version of the rising edge of SCL. SCL is delayed and deglitched inside the ISL98001 for three crystal clock periods (120ns for a 25MHz crystal) to eliminate spurious clock pulses that could disrupt serial communication. When the contents of the ISL98001 are being read, the SDA line is updated after the falling edge of SCL, delayed and deglitched in the same manner. EMI Considerations There are two possible sources of EMI on the ISL98001: Crystal oscillator. The EMI from the crystal oscillator is negligible. This is due to an amplitude-regulated, low voltage sine wave oscillator circuit, instead of the typical high-gain square wave inverter-type oscillator, so there are no harmonics. The crystal oscillator is not a significant source of EMI. Digital output switching. This is the largest potential source of EMI. However, the EMI is determined by the PCB layout and the loading on the databus. The way to control this is to put series resistors on the output of all the digital pins (as our demo board and reference circuits show). These resistors should be as large as possible, while still meeting the setup and hold timing requirements of the scaler. We recommend starting with 22. If the databus is heavily loaded (long traces, many other part on the same bus), this value may need to be reduced. If the databus is lightly loaded, it may be increased. Intersil's recommendations to minimize EMI are: * Minimize the databus trace length * Minimize the databus capacitive loading. If EMI is a problem in the final design, increase the value of the digital output series resistors to reduce slew rates on the bus. This can only be done as long as the scaler's setup and hold timing requirements continue to be met. ISL98001 Serial Communication Overview The ISL98001 uses a 2-wire serial bus for communication with its host. SCL is the Serial Clock line, driven by the host, and SDA is the Serial Data line, which can be driven by all devices on the bus. SDA is open drain to allow multiple devices to share the same bus simultaneously. Communication is accomplished in three steps: 1) 2) 3) The Host selects the ISL98001 it wishes to communicate with. The Host writes the initial ISL98001 Configuration Register address it wishes to write to or read from. The Host writes to or reads from the ISL98001's Configuration Register. The ISL98001's internal address pointer auto increments, so to read registers 0x00 through Configuration Register Write Figure 12 shows two views of the steps necessary to write one or more words to the Configuration Register. Configuration Register Read Figure 13 shows two views of the steps necessary to read one or more words from the Configuration Register. 27 FN6148.3 March 8, 2006 ISL98001 SCL SDA Start Stop FIGURE 9. VALID START AND STOP CONDITIONS SCL from Host Data Output from Transmitter Data Output from Receiver Start Acknowledge 1 8 9 FIGURE 10. ACKNOWLEDGE RESPONSE FROM RECEIVER SCL SDA Data Stable Data Change Data Stable FIGURE 11. VALID DATA CHANGES ON THE SDA BUS 28 FN6148.3 March 8, 2006 ISL98001 START Command ISL98001 Serial Bus 1 0 0 1 1 0 A (pin 48) R/W 0 Signals the beginning of serial I/O ISL98001 Serial Bus Address Write This is the 7-bit address of the ISL98001 on the 2-wire bus. The address is 0x4C if pin 48 is low, 0x4D if pin 48 is high. Shift this value left to when adding the R/W bit. ISL98001 Register Address Write A7 A6 A5 A4 A3 A2 A1 A0 This is the address of the ISL98001's configuration register that the following byte will be written to. ISL98001 Register Data Write(s) This is the data to be written to the ISL98001's configuration register. Note: The ISL98001's Configuration Register's address pointer auto increments after each data write: repeat this step to write multiple sequential bytes of data to the Configuration Register. Signals the ending of serial I/O D7 D6 D5 D4 D3 D2 D1 D0 (Repeat if desired) STOP Command S T Serial Bus A R Address T 1 0 0 1 1 0A0 A C K Register Address aaaaaaaa A C K Data Write* dddddddd A C K S T O P Signals from the Host SDA Bus Signals from the ISL98001 * The data write step may be repeated to write to the ISL98001's Configuration Register sequentially, beginning at the Register Address written in the previous step. FIGURE 12. CONFIGURATION REGISTER WRITE 29 FN6148.3 March 8, 2006 ISL98001 START Command ISL98001 Serial Bus 1 0 0 1 1 0 A (pin 48) R/W 0 Signals the beginning of serial I/O ISL98001 Serial Bus Address Write This is the 7-bit address of the ISL98001 on the 2-wire bus. The address is 0x4C if pin 48 is low, 0x4D if pin 48 is high. R/W = 0, indicating next transaction will be a write. ISL98001 Register Address Write A7 A6 A5 A4 A3 A2 A1 A0 START Command ISL98001 Serial Bus 1 0 0 1 1 0 A (pin 48) D1 R/W 1 This sets the initial address of the ISL98001's configuration register for subsequent reading. Ends the previous transaction and starts a new one ISL98001 Serial Bus Address Write This is the 7-bit address of the ISL98001 on the 2-wire bus. The address is 0x4C if pin 48 is low, 0x4D if pin 48 is high. R/W = 1, indicating next transaction(s) will be a read. ISL98001 Register Data Read(s) This is the data read from the ISL98001's configuration register. Note: The ISL98001's Configuration Register's address pointer auto increments after each data read: repeat this step to read multiple sequential bytes of data from the Configuration Register. Signals the ending of serial I/O D7 D6 D5 D4 D3 D2 D0 (Repeat if desired) STOP Command S T Serial Bus A R Address T 1 0 0 1 1 0A0 A C K R E S T Serial Bus A Address R T 1 0 0 1 1 0A1 A C K Signals from the Host SDA Bus Signals from the ISL98001 Register Address aaaaaaaa Data Read* S T O AP C K * The data read step may be repeated to read from the ISL98001's Configuration Register sequentially, beginning at the Register Address written in the two steps previous. Adddddddd C K FIGURE 13. CONFIGURATION REGISTER READ All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 30 FN6148.3 March 8, 2006 128-Lead Metric Quad Flat Pack (MQFP) Package 31 ISL98001 ISL98001 FN6148.3 March 8, 2006 All dimensions in mm. |
Price & Availability of ISL9800106
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |